Brand

Model/Services

Exclusive Features

Aishwarya Telecom

Splicing Machine - Z1C (Sumitomo-Japan)

TEC approved; ultra fast splicing (7 seconds); ultra fast heating (28 seconds); low maintenance cost; touch screen; user friendly; universal clamps; automatic arc calibration; low weight; high data storage; shock resistance; water resistance; dust resistance; 64 images/10000 data storage capacity; provides 200 splice and heat cycle; remote upgradation; 300 splicing programs and 100 heating programs

OTDR  - FMM-1315B OTDR (ATL-India)

Compact modular platform with upto three functional modules; specially designed for FTTx/PON applications; 850/1300/1310/1490/1550/1625/1650 nm (mono/double/triple wavelength); maximum dynamic range of 45 dB; event dead zone of 1 m and 4 m attenuation dead zone

Cable Route Locator
(10 Watt) - 8879v3
(Rycom-USA)

The 8879v3 Series offers FrequencyFlex allowing users to adapt the system to their specific needs. From crowded easements to long runs of pipe, the 8879v3 is a dependable locate package. The lightweight and well balanced receiver provides both relative and actual signal strength. Signal response is indicated by LCD and via variable audio pitch. Push-button  depth and current measurement along with four signal response modes — peak, pinpoint peak, directional and null — allow the user to minimize interference and maintain the locate on the target conductor. Whether the locate is measured in feet or miles, with automatic impedance matching from 5 ohm to 25,000 ohm, the 8879v3 will meet the challenge

Site Analyzer  - Protek A434 (GSI-Korea)

Cable and antenna analyzer with a frequency range from 25 MHz to 4 GHz; a lightweight portable diagnostic tool makes distance-to-fault measurements to accurately pinpoint the fault’s location; 7-inch display providing ease-of-use and control

Spectrum Analyzer (GSI-Korea)

Frequency of 100 kHz to 4.4 GHz optimized for the convenience of mobility with light weight (<2 kg), 5.7 inch sunlight readable LCD, long battery life (>8 hour) and smart battery indicator

RF Power Meter - RFPM-A (ATL-India)

Measures RF power accurately in analog and digital systems; operates over a broad frequency range and has the ability to measure true average power; designed for handling the CDMA, GSM, WCDMA, bands and low-power consumption LCD display has simple keypad operation with frequency, SET off set, increase decrease and direct hot key for dBm/Watt

Interference Hunting Analyzer - BTS Tester - UCTT8901 (Sage Instrument)

Hunting analyzer! samples 25 MHz simultaneously; Over 30 test sets in one; Combines 25 MHz FFT Spectrum Analzyer, Antenna and Cable, VNA, Multi-Channel Scanner, Demodulation, Power Meter, Interference Analyzer, VSG and Backhaul testing

Anritsu

S412E LMR Master

Ideal instrument for Land Mobile Radio (LMR), Professional Mobile Radio (PMR) technicians and engineers engaged in field testing the RF performance of NBFM, P25, P25 Phase 2 (TDMA), NXDN, ETSI DMR, MotoTRBO, ETSI TETRA, and LTE for commercial, public safety, maritime, and critical infrastructure radio systems. In addition the LMR Master offers support for USA Class 1 railway Positive Train Control systems

Remote Spectrum Monitor MS27101A/MS27102A/ MS27103A

The MS27101A is housed in a ½ rack enclosure with 1U height, designed exclusively for indoor applications.   MS27102A is an IP67-rated device which operates outdoors, with the ability to be mounted on poles or walls (using the included mounting bracket).  The MS27103A is a multi-port spectrum monitor (12 RF In ports or optionally 24 RF In ports) which is ideal for cellular, DAS, and other applications requiring the use of multiple antennas. Capable of sweep rates up to 24 GHz/s, each monitor allows for the capture of many types of signals. This includes periodic or transient transmissions as well as short bursty signals. The 20 MHz instantaneous FFT bandwidth available on each monitor provides the ability for wideband real-time captures of signal activity for subsequent post-processing. IQ captures can be recorded both in block mode or streamed to internal memory and remote clients. A save on event feature is also provided to capture spectrum measurements only when certain user-settable thresholds are violated. This saves memory space since only signals of interest are captured and recorded

MS46121A

A series of two PC-controlled 1-Port USB ShockLine Vector Network Analyzers with frequency ranges of 40 MHz to 4 GHz and 150 kHz to 6 GHz; the MS46121A provides performance and accuracy for 1 port measurements in a low cost and space saving solution that is small enough to directly connect to the device under test

S332E Site Master

Cable and antenna analyzer: 2 MHz–4 GHz, spectrum analyzer: 9 kHz–4 GHz, return loss, cable loss, VSWR, distance-to-fault, Smith Chart, 1-Port Phase, intuitive menu-driven touch screen user interface, USB connectivity, built-in touch screen keyboard, field-proven design: four-hour battery life, rugged, compact, lightweight, daylight viewable display, standard three-year warranty (battery one-year warranty)

S820E- Microwave Site Master

Frequency options covering 1 MHz–8, 14, 20, 30, and 40 GHz, available Vector Network Analyzer (VNA) and Vector Voltmeter (VVM) options allow users to expand the S820E’s versatility at any time; adding options to the S820E is hassle free







PIM Master MW82119B

 

A Featuring Site Master line sweep capability; with the Site Master option included, the PIM Master is able to fully certify cable and antenna system performance, measuring PIM, Distance-to-PIM, Return Loss 40W battery, VSWR, Cable Loss and Distance-to-Fault with a single test instrument. PIM Master MW82119B Battery-operated, High Power Portable, Passive Intermodulation Analyzer with optional Cable & Antenna Analyzer

PIM vs Time, Swept PIM, Distance-to-PIM, Noise Floor, Battery Operated: >3 hour, >20 dBm (0.1 W) to 46 dBm (40 W), field-proven design: Rugged, compact, daylight viewable display, standard three-year warranty (battery one-year warranty); Site Master Cable and Antenna Analyzer, 2 MHz–3 GHz, Return Loss, VSWR, Cable Loss, Distance-to-Fault, Smith Chart, 1-Port Phase.GPS, High Accuracy Power Meter

Signalling Tester
(Base Station Simulator) MD8475A

An all-in-one base station simulator supporting LTE, LTE-Advanced, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/GPRS/EGPRS, CDMA2000 1X/1xEV-DO Rev. A. and TD-SCDMA/TD-HSPA; it supports service, VoLTE and call-processing tests for multimode LTE smartphones and mobiles with excellent cost performance

Radio Communication Analyzer MT8821C

Supports all technologies, ranging from LTE-Advanced to 3G/2G, with its easy-to-use measurement functions for RF adjustment and testing in one unit

MS2830A-044 and MS2830A-045  Signal Analyzer

Frequency coverage to 26.5 GHz and 43 GHz for unmatched value in their class. Compatible with Anritsu’s External Mixer MA27xxC series, enabling millimeter-wave spectrum analysis to 325 GHz

MS2720T- Spectrum Master

Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz and 43 GHz, measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength, 3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and TD-SCDMA, interference analyzer: spectrogram, signal strength, RSSI, mapping

RF/Microwave Signal Generator MG3690C Series

Broad frequency coverage, phase noise, pulse modulation, fast switching speed, full analog modulation, high output power, highly configurable, highly reliable; covers audio, HF, VHF, UHF, RF and microwave frequencies from 0.1 Hz to 70 GHz in single coaxial output and up to 500 GHz or beyond, with external multipliers; in addition, easy to operate either through intuitive front panel controls or remotely via GPIB or Ethernet connectivity

BTS Master MT8220T - Handheld Base Station Analyzer

Support 4G wireless networks as well as installed 2G, 3G and WiMAX networks; provides 20 MHz bandwidth modulation quality for LTE eNodeB testing equipped with a high-contrast, touch screen display and backlit key panel

Mobile Device Test Platform ME7834

An all-in-one platform supporting multisystem mobile terminal protocol conformance tests and carrier acceptance tests; In addition to supporting stand-alone tests of W-CDMA and LTE systems, can also be configured as a customized integrated environment for Inter-RAT tests between LTE, GSM, W-CDMA, CDMA2000 and TD-SCDMA mobile systems

NETWORK MASTER Flex MT1100A

All-in-one transport tester supports testing from 1.5 Mbps to 100 Gbps, OTN core and metro network research, development, manufacturing, installation, and maintenance, Class Ethernet equipment manufacturing, installation and troubleshooting, mobile backhaul network installation and verification, mobile fronthaul network installation and verification, powerful storage area networking (SAN) testing, quick and easy testing of SDH/SONET and PDH/DSn networks, upto 4 ports at all rates, easy and intuitive GUI, WLAN/Bluetooth/LAN connectivity, PDF, CSV and XML report generation for documentation of test results, remote operation (VNC), dedicated remote GUI software and remote control (scripting), compact, lightweight design for maximum field portability, modular platform

BERTWave MP2100B - Test Set with Built-in BERT and Sampling Oscilloscope Supporting Evaluation of Optical Modules

Includes BER measurements, Eye Mask tests, Eye pattern analyses; Incorporates a BERT supporting upto 4 channels as well as a sampling oscilloscope in a single, compact, 18 cm deep cabinet, Reduces measurement times by eliminating the need to change cable connections at simultaneous BER measurements, eye mask tests, and eye pattern analyses; adding the SFP+ plug-in port supports optical BER measurements; Built-in 4ch BERT and sampling oscilloscope; simultaneous 4ch Bit Error Rate (BER) measurements, high-quality waveform PPG (1 ps rms Jitter), high-input sensitivity (10 mVp-p minimum input sensitivity), high-speed Eye Mask test and eye pattern analysis at 150 ksample/s max, supports differential signal BER measurement, eye Mask test and Eye pattern analysis, up to six built-in Bessel filters for full-featured application support, compact (18 cm deep) test set for optical module evaluation, simultaneous measurement of BER, Jitter, Eye pattern and Eye Mask, supports WDP measurements, calculates optimum values for sampling simultaneously with equalizer and emphasis values to display Eye Pattern, and simultaneous Eye Pattern, eye mask and jitter measurements of simulated waveform

S331P – Ultraportable Site Master Series of Cable and Antenna Analyzers

It is the smallest, lightest, fastest, and most cost effective instrument in the Site Master family. Available with two frequency ranges starting from 150 kHz up to 4 GHz and 150 kHz to 6 GHz, it is a small headless Site Master product capable of measurements down to 150 kHz for low frequency radio communications applications and up to 6 GHz for higher frequency applications like LTE-U in the 5 GHz unlicensed spectrum. Can use a powerful suite of software applications Optimized for field use; Smallest, lightest, and fastest Site Master; Direct connection to DUTs eliminating the need for phase stable cables; and Powered through USB interface (No battery required)

MA24507A Power Master

A ultraportable, USB-powered mmWave power analyzer which enables simple, numeric frequency-based measurement of RF power from 9 kHz to 70 GHz and as low as -90 dBm. Enables measurements in a USB-powered device slightly bigger than a smartphone

MT1000A Network Master

A cost-effective, easy-to-use, full-function, multi-protocol transport tester. It is the ideal all-in-one platform for R&D and manufacturing tests as well as network I&M and troubleshooting tests at bit rate to 100 Gbps. The easily expandable MT1100A platform offers a cost-effective upgrade path customized to network conditions.

Aplab

1072 - Aplab Digital Psophometer

A portable unit designed for the use of testing telecommunication equipment; has Psophometric filter, which has the frequency response of the weighing network based on the CCITT recommendations and frequency response characteristics for unweighted measurements

DDS20/DDS150/DDS300 - Aplab DDS Signal Generators 20MHz/150MHz/300MHz

Double independent Outputs, AM FM/PM/FSK/ PSK Modulation, 1PPM High accuracy, Users can set accurate pulse width, burst signals as numbers, USB Device, RS-232

4300R- Aplab 20 Hz to 300 kHz High Precision LCR Q Meter

20 Hz to 300 kHz test frequency; 0.05 percent high measurement accuracy; R/Q, C/D, C/R, L/Q test modes; measurement parameters - Ls/Lp, Cs/Cp, Rs/Rp, D, Q, ESR, EPR, Z

AWG30D, AWG80D, AWG120D, Dual Channel Arbitrary Waveform Generaotrs, 30MHz, 80MHz, 120MHz

4.3’ high resolution TFT LCD display, two independent channels outputs with same characteristics, 1-uHz frequency resolution for whole range, 120-MSa/S sampling sate, 14-bit vertical resolution, 5 std. wavforms 50 built-in & 5 users defined wavforms

Astellia India

Nova Customer Analytics

Helps mobile operators gain a better understanding of customer behavior; follow QoE for key customers; detect potential churners; as well as monitor and assess corporate service level agreements (SLA)

Nova Performance Analytics

Provides performance management and KPI trend analysis capabilities; enables multi-dimensional data manipulation (network element, cell, APN, QCI, applications, group of subscribers & devices)

Nova Service Analytics

Empowers SOC department with service quality management to pinpoint service problems at network level and trouble ticket to the right team thanks to issue demarcation capabilities

Nova RAN Optimizer

A multi-technology & multi-vendor radio optimization tool which uses network equipment call trace files to measure RF coverage & quality of the network. It facilitates daily radio optimization tasks by automating recurrent analysis and reduces drastically the number of drive tests

Nova Care

Designed for customer service and technical support departments; provides subscriber experience overview assessments and fast customer complaint analysis

Nova Explorer

A powerful application for deep end-to-end troubleshooting (from RAN to core), problem root cause identification of customer complaints, and quality degradations over multi-technology networks

Nova Alerter

Empowers supervision teams with real-time fault detection to trigger alarms based on customer-centric quality indicators and on KPI trend analysis

Deviser Instruments

DS8831H Spectrum Analyzer and DS1500 RF Multiplexer for Headend Monitoring

A rackmount spectrum analyzer with the same specification as the portable DS8831Q. The RF multiplexer has a full 1 GHz RF performance and can be expanded to support 256 ports

S8853Q and DS8831Q Portable Spectrum Analyzer

Portable spectrum analyzer, used to analyze RF signals with a comprehensive set of measurements for HFC networks

DS2500Q Digital TV QAM Analyzer

A rugged, handheld tool for installation, maintenance and troubleshooting HFC networks

E7000A Cable Analyzer

Verifies the site’s cable feedline, connectors and antenna system, including signal reflections (return loss or VSWR), fault location (distance to fault), cable loss and RF transmission power in a lightweight, handheld instrument

E7000A-SA RF Analyzer

Combines the cable analyzer and the spectrum analyzer into one handheld unit.

E7042B SignalPROFILER

Combines the power and functionality of cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/Optical power measurements in a single instrument

E8000A Spectrum Analyzer

Provides all of the necessary measurement functions and performance to accurately characterize the signal environment in addition to clearing, detecting, identifying and locating signal interference in a lightweight, handheld instrument

E8400B Spectrum Analyzer

Provides all necessary measurement functions and performance to accurately characterize the signal environment in addition to clearing, detecting, identifying and locating signal interference in a lightweight, handheld instrument

EXFO India

Max-700 Series OTDR with IOLM Technology

Fully featured, entry-level, dedicated OTDR with tablet-inspired design, suitable for metro and optimized . Handy, lightweight, powerful, tablet-inspired design 7-inch, outdoor-enhanced touchscreen – the biggest in the handheld industry .iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task

FG-750 Fiber Monitoring system

Scalable test solution for fiber network monitoring and management, from one stand-alone unit. 2 Continuous 24/7 fi ber network monitoring. 3. Automation of OTDR testing for network operation and maintenance

Max-800 series for Ethernet and SDH Analyser

The MAX-800-IN Series is an easy-to-use, portable 10G test solution. Optimize your field technicians’ tasks by running up to two 10G tests simultaneously . Lightweight and portable solution designed for fi eld engineers or cell technicians installing, troubleshooting and maintaining backhaul, OTN, SONET/SDH and DSn/PDH Carrier Ethernet networks

Fiber inspection probe -FIP-400

This intelligent and automated test tool transforms fi ber inspection into a faster and simplified one-step. Useful for data centers, campus and private networks, lab and research

FTB-890-100G Tester

The NetBlazer V2 Series is the industry’s most complete and portable 64K TO 100G test solution. Optimize field technicians’ tasks with simultaneous coverage of legacy and high speed network interfaces

FTB-88100NGE/88100G

10M-to-100G compact multiservice field-test solution addressing testing, troubleshooting and performance-assessment requirements of next-generation networks. Unprecedented testing simplicity requiring minimal training for new users and maintaining a consistent experience from the lab to the field

Fastech Telecommunications

UX400

The multi-service transport test solution ranging from DS1/E1 all the way up to 600G traffic generation, supporting the latest 100G/40G optical pluggable form factors (CFP4, CFP2, CFP, QSFP28, QSFP+)

RXT 1200 - RXT 6000

Modular platform for Ethernet testing from 10Base-T to 100GE, OTN, fiber channel and SDH/SONET, CWDM and DWDM networks

TX300s/TX320, RXT 3000, MTTplus 320

IP Transport and OTN/SDH Testing Multi-interface Analyzer  testing from DS1/E1 to OC-192/STM-64 and/or Metro Ethernet testing options including 10GE, 1GE and 10/100/1000Base-T

TX130e+ and TX130M+

Combined E1 and Ethernet Testing, Test IEEE 1588V2/PTP and SyncE Ethernet Synchronization, Tests Datacom, ISDN PRI and voice frequency channels

TX150e+

SDH Analysis for STM – 0/1/4/16. PDH/DSn testing at E1, E2, E3 bit rates. DS1, DS3 and E4 Jitter/Wander Measurement as per ITU-T O.171

MX100e+ and MX120e+

Single or dual-port Ethernet testing from layer 2 to Layer 4 BERT and RFC 2544 with VSAM Y.1564

MTT plus 410, OPX BOX +, TX300s, RXT 4100, FX150

Ultra-compact, High-end, OTDR designed to operate with Fiberizer software and with Bluetooth Wireless and USB control. Dynamic range upto 45 dB with sampling points up to 128,000. Optional plug in-module supporting Ethernet Testing on 10/100/1000Base T RJ45 port, 100Base X/1000Base X SFP port

FX40/FX45/FX50 Series

OPM, OLS, ORL, OLTS configurations, PON, Telecom, CATV and LAN/WAN applications

XenaBay

High port density chassis with 12 slots (up to 144 x 10G, 24 x 40G or 6 x 100G) for Layer 2-3 performance testing

XenaCompact

1U – robust & transportable chassis with 1slot supporting Layer 2-3 Testing

Xena Appliance

Ultra-compact “all-in-one” chassis supports 10 and 1G L4-7 interfaces, and can also be equipped with 1G or 10G L2-3 test modules, making it a complete L2-7 test platform

JAR Emulator

High-precision network emulator from 10 Gbps to 40 Gbps, Simultaneous emulations of different network paths or class of service

SkyLIGHT VCX Controller™

IP Performance Assurance Solution

NanoNID

Provides turn-up testing and troubleshooting capabilities in an extended SFP. Performs in-line and off-line service performance assurance through Y.1731 with LBM and LBR capabilities. RFC-2544 and Y.1564 automated service activation testing capabilities

EtherNID, MetroNID and MetroNODE(10GE)

High-performance service assurance platform defines the boundaries of the network with intelligent demarcation, enables end-to-end service provisioning and assurance with carrier-grade performance, TWAMP-Lite reflector capability

V-NID SUITE

V-NID product suite provides performance monitoring of IP networks with high accuracy, and granularity based on TWAMP – RFC 5357

Selective Radiation Measurement: SRM-3006

Compact self-contained solution for field testing of EMF with broadband and selective (narrow-band) frequency measurements, isotropic field strength measurements from 9 kHz to 6 GHz
Calibration facility now available in India

NBM 550 and NBM 520

Handheld broadband EMF measurement from 1 Hz to 60 GHz for compliance to ICNIRP Occupational and General Public Standards

Area Monitor AMB 8059

Performs long-term EMF measurement analysis for baseline. Directly uploads results on FTP. Results on website through in-built SIM card provides confidence to general public

Interference and Direction Analyzer: IDA 2

Portable spectrum analyzer for radio monitoring, interference analysis and hunting in the frequency range from 9 KHz to 6 GHz. I/Q Analysis for detecting in-band interference in digital signals

NRA RX

Frequency range of 9 KHz to 6 GHz. Simultaneous multi-channel power analysis. Rapid scanning with a sweep rate of 12 GHz/s.

EXflex, IBflex, and Mxflex Scanners

Test Multi-Operator Networks with One Unit, LTE FDD / TD-LTE, WCDMA/HSPA(+), TD-SCDMA ,GSM,CDMA / EV-DO Technology and Multi Band Support

SeeHawk Studio, SeeHawk Engage

Cloud based 2G/3G/4G Drive Test Tools

SevOne PAS

Performance Monitoring, Traffic Analysis, and Troubleshooting System

Nexus 8630

Multi-user portable analyzer enabling the monitoring and troubleshooting of access networks (ISDN/PRI, SS7), mobile networks (GSM, GPRS, UMTS, HSPA+, CSMA-1/CDMA2000), IMS/NGN/WiMAX (VoIP) networks and LTE networks (Control Plane and User Plane correlation) Protocol analyzer

Copper Taps

Supports 10/100/1000 Mbps. Hyper-fast fail over and link re-negotiation for 1G copper networks. Dual, redundant, universal power supplies (AC, DC options)

Optical Taps

Supports 100M, 1G, 10G, 40G & 100G traffic-Optical. 100% passive inline optical access. Split ratios as per requirements

Packet Brokers, Aggregator & Load Balancer

One platform for In-Line and Passive Monitoring. Monitoring Infrastructure for accessing, capturing and brokering traffic from one or more ports to multiple network monitoring and security tools. 100G, 40G, 10G and 1G access at full line rates

WaveJudge 4900/IntelliJudge

Advanced LTE and WiMAX Test System. Decodes and analyses signals with eNB and UE on LTE and WIMAX. RF wideband support 380 Mhz to 6 GHz up to 40 MHz BW.

Fluke Networks

DSX-5000 CableAnalyzer

Accelerates every step of the copper certification process. DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V – the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR). The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss, and shield faults. Analyzes test results and creates professional test reports using LinkWare™ Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

OptiFiber Pro OTDR

OptiFiber Pro is the first OTDR built from the ground up for enterprise fiber optic cabling testing. OptiFiber Pro is focused on reducing costs while enhancing productivity and improving network reliability.

CertiFiber Pro Optical Loss Test Set

Fastest time to certify – two fibers at two wavelengths in three seconds, encircled Flux compliant as required by ANSI/TIA and ISO/IEC, merged Tier 1 (Basic)/Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro, ProjX management system ensures all jobs are completed correctly and efficiently

IDEAL Industries Inc. (India)

LanTEK III (Copper and Fiber Cable Certifier)

Can test data on the IDEAL AnyWARE app, anywhere 18 hours battery backup, 5000 test storage capacity and able to locate hidden connections, splices and cable faults using Time Domain Return Loss (TDRL) and Time Domain Crosstalk (TDX). Field replaceable RJ45 tips that reduce downtime and maintenance costs and provides mobile device connectivity using the USB Wi-Fi

SignalTEK NT (Data Cable Transmission Tester)

Enables test prove error-free  Gigabit performance testing on passive cabling and active networks; Generates test reports to IEEE 802.3ab standard. Simulates VoIP/CCTV/Web/IP video network traffic.Tests connection speed, port ID, ping, traceroute, IPv4/IPv6 and an Advanced PoE/PoE+ testing and provides mobile device connectivity using the USB Wi-Fi

VDV II Series (Cable Verifiers)

 A wiremapper cable tester that checks the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring(RJ11/RJ12), data network (RJ45) and video/security cabling (Coax  F-Type). It utilises  TDR (Time Domain Reflectometry) to accurately measure cable length and provide distance to fault information. TDR’s work by injecting a signal into the cable and measuring the time for any signal to be reflected back after encountering changes in impedance caused by cable damage, open and short circuits. The recorded time is then translated into an accurate distance measurement. By detecting the presence of voltage and checking polarity, it quickly determines which media service is running over the cable, such as ISDN, PBX and PoE (Power over Ethernet) resulting in faster fault diagnosis , aids troubleshooting and improves on-site productivity

TONE and PROBE  (Cable Tracing)

The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation. It allows for pin point
identification even in the most congested cable bundles. Use the tone generator to apply a tone signal to a wire pair or single conductor, and trace with an amplifier probe. When used with the amplifier probe, the tone generator allows technicians to identify a wire within a bundle, at a cross connect or at a remote end. It can be used on twisted pair, coax, and de-energised AC wiring

OTDR II (Fiber Tester)

The OTDR II is the first tablet-inspired OTDR that is handy, lightweight and rugged enough for any environment. With a 7-inch outdoor enhanced touchscreen, the most efficient handheld display in the industry, it delivers an unprecedented user experience. Its intuitive user interface including onboard manual ensures a fast learning curve. Plus, its new and improved OTDR platform offers icon-based functions, instant boot-up, automatic macrobend finders as well as improved auto and real-time modes.

NaviTEK NT (Copper & Fiber Network Trouble Shooter)

Unique pluggable RJ45 ports enables quick field replacement of faulty ports; offers userfriendly operation with one button auto test for quick troubleshooting color graphical wire map with list of faults and length, realtime graphical bandwidth measurement along with other L2 measurement like maximum/average/current bandwidth frames and errors/VLAN counting

LanXPLORER Pro (In-Line Network Trouble Shooter)

Comprehensive network tester (both in-line active and passive networks); extensive test capability for copper, fiber, and Wi-Fi networks; perfect test tool for IT installers and system administrators in any enterprise, campus, or industrial environment; mapping of LAN assets and users alonwith IP details; top 10 bandwidth user identification for quick identification of bandwidth bottlenecks; VoIP testing with customized threshold; Ethernet loopback and inline monitoring application

SecuriTEST PRO (CCTV Security Tester)

It is the most versatile all-in-one installation and troubleshooting tool for the CCTV professional. It brings CCTV camera testing to a higher level with integrated IRE testing of sync and video levels for maximum productivity.  The SecuriTEST™ PRO combines seven essential CCTV tools; a CCTV Video Tester, PTZ Camera Controller, Digital Multi-Meter, UTP Wire Map Cable Tester, Video Test Pattern Generator, PTZ Protocol Analyser, and Camera Programmer in a single compact package

UNIPRO MGig1 (Enterprise/Carrier Transmission Tester)

Offers full Gigabit Ethernet testing of carrier service turn-up, mobile backhaul link, microwave and wireless link and monitors carriers’ SLA performance for enterprise users; tests include Y.1564 with color policing, RFC2544, SLA tick test, BERT, multi-stream, QinQ & MPLS support

Ixia

IxNetwork

Tests complex routing, switching, and FCoE topologies by emulating a wide range of routing protocols, along with authentication and broadband encapsulations; powerful traffic generation tools for any type of layer 2/3 testing

IxLoad

Multi-play networks and devices through emulation of Internet protocols; all common data, voice, and video protocols are supported

IxN2X

Tests complex routing and switching topologies across the IP/MPLS core, carrier edge, and broadband access networks; powerful traffic generation and analysis capabilities for any type of layer 2/3 testing

Keith Electronics Pvt. Ltd.

Splicing Machine- Fujikura 80S

Core alignment fusion splicer covering varied splicing needs in telecommunication field with a series of innovative features. Also dealing in OTDR’s, optical power meters, visual fault loactors and laser sources

Keysight Technologies

E7515A UXM Wireless Test Set

The UXM is a highly integrated signaling test set created for functional and RF design validation in the 4G era and beyond. It provides the integrated capabilities to test the newest designs, delivering LTE-Advanced Pro data rates up to 1 Gbps now and handling more complex requirements later.

E6650A EXF Wireless Test Set for Femtocell

The EXF is the industry’s first one-box tester dedicated to femtocell manufacturing, and it’s validated with the latest cellular and WLAN chipsets. It also delivers the speed, performance, and scalability needed to ramp up rapidly and lower the cost of test.

E5515E 8960 Series 10 Wireless Communications Test Set

The new Keysight E5515E hardware platform for the 8960 wireless communications test set is specifically designed to meet the challenging demands of wireless device hardware, software and application development. Leveraged from the world-class E5515C hardware platform, the E5515E has new and improved high data rate hardware, multiple signaling and RF paths and increased headroom to support today’s cutting edge 3.5G technologies, such as 42 Mbps DC-HSDPA, DB-DC-HSDPA and HSDPA-MIMO.

T4010S Conformance Test System

The Keysight T4010S conformance test system is the most efficient test tool available on the market today. The test platform covers conformance testing according to 3GPP TS 36.521-1 LTE RF and 3GPP TS 36.521-3 LTE RRM for FDD and TDD, 1CC, 2CC, and 3CC, as well as LTE device acceptance test plans from major network operators. LTE Advanced features, such as Release 10, 11 and 12 carrier aggregation are also available on the T4010S.

T4020S LTE RRM Test System

The T4020S LTE RRM tester provides a set of powerful tools specifically designed for helping users in their conformance testing projects. These conformance tools allow users to enter the information about the Device Under Test (DUT) and its main features supported, the definition of test plans to be executed, running these test campaigns automatically without user intervention, and the analysis and reporting of the results obtained.

T4110S LTE Protocol Test System

The T4110S LTE Protocol Tester is the right tool for test laboratories and LTE device manufacturers desiring to exercise LTE 3GPP signaling conformance test cases.

GS-8800 Series RF Design Verification and Conformance Test Systems

The Keysight GS-8800 is a series of scalable test systems built on the 8960 (E5515 series) wireless communications test set, covering cellular device design verification, conformance, and manufacturing test needs.

T3111S NFC Conformance Test System

The T3111S RIDER NFC Conformance Test System is the Keysight solution for RF Analog and Digital Protocol testing of NFC, EMV and ISO devices. The Test System is based on the Keysight T1141A NFC Test Set and it is complemented by the Keysight’s or FIME’s robots for accurate and repeatability RF testing.

T1111S Bluetooth® RF Conformance Test System

T1111S BITE Bluetooth® RF Conformance Tester is a modular test system that performs automatically the conformance test cases for Bluetooth basic rate, EDR, enhanced power control and Bluetooth low energy requirements. BITE T1111S supports test reports templates customization, remote control of the system, customization of calibration procedures and automatic control of climate chambers.

Advanced Design System Software (ADS) and SystemVue ESL Software

Use Keysight’s system simulation tools such as SystemVue and ADS to get the design right the first time, and use them in combination with test instrumentation to move quickly to the real world. Providing ready-to-use reference signal processing intellectual property (IP) for cellular technology research, these libraries dramatically increase the productivity for system architects and baseband physical layer (PHY) designers including the latest in 5G.

89600 VSA and WLA Software

89600 VSA software measures RF and vector modulation qualities of digitally modulated signals. Use vector signal analyzer software in R&D to troubleshoot over 75 different standards and vector modulation formats.

Signal Studio Software

Keysight Signal Studio and embedded software is a suite of flexible, easy-to-use, signal creation software that will cut the time spent on signal simulation. And, with a demonstrated first-to-market track record, Keysight’s signal creation software offers insight and confidence in the design.

Keysight Reference Solutions

Accelerate the development of new millimeter-wave (mmWave) channel models using the 5G channel sounding reference solution. It provides accurate broadband measurements that provide greater confidence to analyze possible new 5G channels. The testbed for 5G waveform generation and analysis enables to perform broad “what if?” analyses. Waveforms at RF, microwave, and mmWave frequencies with a variety of modulation schemes at different bandwidths can be created.

X-Series Signal Analyzers

The X-Series is an evolutionary approach to signal analysis that spans instrumentation, measurements and software. It gives the flexibility to satisfy the business and technical requirements across multiple products and programs.

X-Series Measurement Applications

The X-Series measurement applications help to easily achieve the manufacturing test goals for today’s multi-format devices. It quickly performs standards-based measurements for compliance with IEEE 802.11 series standards and other wireless connectivity technologies.

E7760A Wideband Transceiver

E7760A is a 2U height wideband transceiver for wideband component, subsystem, and system measurements. It can cover 2 IF input/output ports from 2 to 18 GHz and up to RF input/output ports from 55 to 68 GHz connecting the M1650A mmWave transceiver.

E6610A Remote Radio Head Tester

The E6610A provides a very cost-effective, off-the-shelf solution that covers many of the key RF measurements and the CPRI optical interface all in a single unit. Significantly, it provides a 2-channel RRH test solution, for less than half the cost of alternative 1-channel solutions today. The small form factor, comprehensive solution is ideal for manufacturing environments and to lower the cost of test while increasing yield.

Signal Generators

Keysight offers the widest selection of baseband, RF, and microwave signal generator (signal source) products from baseband to 67 GHz, with frequency extensions to 500 GHz with millimeter-wave source modules. Signal generator offerings range from basic to advanced functionality; each delivers benchmark performance in its class to address signal source requirements in design and manufacturing.

Network Analyzers

Connect the Keysight PNA-X or ENA network analyzers and match real-world test results with simulation data for the immediate feedback needed to refine a design. Our multiport VNA solution based on a PXI platform provides the performance, speed, multi-site measurement functionality, and flexibility today’s engineers need to quickly and reliably test multiport components.

Oscilloscopes

When there is need for the fastest real-time oscilloscope on earth with the highest measurement accuracy anywhere, the only capacitive touch screen oscilloscopes, or something a little more basic, Keysight oscilloscopes outperform in every category.

66319B/D and 66321B/D Mobile Communications DC Sources with Battery Emulation

The Keysight Mobile Communications DC Source 663xx series offers several features ideal for testing wireless and battery powered devices. Excellent voltage transient response ensures maximum test-system throughput by minimizing device shutdowns due to significant voltage drops in the test wiring. Built-in advanced measurement system to accurately measure battery current drains when the device operates in different modes and a Keysight-developed feature that enables cellular telephone manufacturers to detect permanently and intermittently open-sense wire connections.

N6705B DC Power Analyzer

The N6705B DC Power Analyzer provides unrivaled productivity gains for sourcing and measuring DC voltage and current into the DUT by integrating up to 4 advanced power supplies with DMM, Scope, Arb, and Data Logger features. The N6705B eliminates the need to gather multiple pieces of equipment and create complex test setups including transducers (such as current probes and shunts) to measure current into the DUT.

FieldFox and HSA Handheld Spectrum Analyzers

FieldFox Handheld Analyzers. Keysight’s FieldFox RF analyzers are designed to withstand the roughest working conditions. To accelerate maintenance and troubleshooting each operating mode has a task-driven user interface that saves time in the field.

 

HSA Handheld Spectrum Analyzers. Covering frequencies from 9 kHz to 20 GHz, the Keysight HSAs have the features needed for operating in tough field environments and their measurement performance gives the confidence that the job’s been done right. The Keysight HSAs help in automating routine tasks to save time and ensure consistent results.

LitePoint

IQxstream

 

The LitePoint IQxstream is the first multi-DUT cellular communication solution for precise verification of 2G/3G/4G smart devices and Wi-Fi, BT, Zigbee and other connectivity technologies.

IQxel-MW

The LitePoint IQxel-MW™ is the world’s first test solution for the next generation of Wi-Fi technologies. Ideal for both R&D and high-volume production, IQxel-MW delivers high performance verification for the most popular wireless connectivity standards including 802.11, Bluetooth, DECT and ZigBee. Additionally, IQxel-MW offers high-efficiency parallel testing for up to 16 devices.

Livingston

Offers a vast selection of Electronic T&M instruments leading manufacturers from of test instruments suitable for various applications, Telecom, RF & Semicon, and General Electronics  Keysight, Tektronix, JDSU, EXFO, Fujikura, and R&S

MECO Instrument

5KV 200G OHM Digital Insulation Tester

3 1/2 digit (1999 counts) large LCD display
High accuracy; Range selection and single person push button operation
LCD back light function with indicator switch

Insulation Tester - Analog

Single person push button operation; High accuracy ± 5% of indicated value in effective range; Scale Lenght : 80 mm (approx); Terminal Voltage : > 85% of rated voltage for insulation resistance

LCR Meter

Basic measurement accuracy 0.1% & speed upto 10 meas/sec
Large LCD display with bright white backlight
Ultra low power consumption, battery powered for 24
hours of continuous use
Automatic identification function (Ai)

MEL Systems and Services

AFL, USA

OTDR, visual fault locators, WDM test sets, optical power meters, optical Laser sources, fiber identifiers, fiber optic inspection, cleaning, talk sets, attenuators, software, network simulators, calbration systems, accessories for OF cable

Narda

IDA 2

Handheld signal analyzer for detecting, analyzing and localizing RF signals and interference. It supports, spectrum analysis, direction finding with map view, channel analysis, I/Q analysis, high time resolution spectrograms, persistence spectrum and time domain triggering for 100 percent POI down to the range of nanoseconds.

NRA-RX

Particularly useful for radio spectrum monitoring applications: Excellent RF characteristics, analysis in the frequency and time domains, I/Q streaming, demodulation, audio output

Radman / Nardalert

Personal EMF radiation monitor for occupational safety and health

NBM-550

For broadband EMF radiation site surveys from ELF (5 Hz) upto RADAR (60 GHz)

SRM-3006

For selective EMF radiation site surveys upto 6 GHz

NI Systems (India)

Oscilloscopes;

Function Generators;

Motion Controllers;

Image Acquisition Boards;

Data Acquisition Boards;

RF Signal Generators;

RF Signal Analyzers;

FPGA boards;

DMMs

PXI based instruments; compact size and mixed measurements; software defined custom measurements; high throughput measurements for automated test

Rohde & Schwarz

R&S SMBV100A Vector Signal Generator

Offers RF performance along with very high output level and short setting times. At the same time, it can be equipped with an internal baseband generator to allow generation of a number of digital standards (e.g., LTE, LTE-Advanced, IEEE802.11ac, GNSS)

R&S FSW Signal and Spectrum Analyzer

Developed to meet demanding customer requirements. Offering low phase noise, wide analysis bandwidth and straightforward and intuitive operation, the analyzer makes measurements fast and easy

R&S FSH Handheld Spectrum Analyzer

Rugged, handy, and designed for use in the field. Its low weight, its simple, well-conceived operation concept and the large number of measurement functions make it an indispensable tool for anyone who needs an efficient measuring instrument for outdoor work

R&S FSV Signal and Spectrum Analyzer

Fast and versatile signal and spectrum analyzer for performance-oriented, cost-conscious users working in the development, production, installation and servicing of RF systems

R&S ZNB Vector Network Analyzer

Feature high measurement speed, outstanding precision and exceptional ease of operation

R&S CMW500 - Platform Overview

Universal tester for testing the air interface of wireless devices. It can be used in all phases of product development and production and supports all common cellular and non-cellular wireless technologies

R&S CMW270 Wireless Connectivity Tester

The non-cellular expert covering WLAN, mobile WiMAX, Bluetooth, FM Stereo, GPS and broadcast technologies. The R&S CMW270 is a cost-effective alternative for the development and production of equipment outside the conventional cellular networks

R&S CBT/CBT32 Bluetooth Tester

Performs Bluetooth RF tests at extremely high speed. Besides power, modulation, frequency and BER tests, the R&S CBT carries out a variety of spectrum measurements on an active Bluetooth connection without requiring any extra spectrum analyzers.

R&S CMA180 Radio Test Set

A radiocommunications tester for radio systems that operate in the 100 kHz to 3 GHz range; its technology is based fully on digital signal processing and advanced computing

R&S CTH100A/R&S CTH200A Portable Radio Test Set

Testing of analog FM radio sets even under challenging environmental conditions

R&S ESW Test Receiver

An EMI test receiver with outstanding RF characteristics, including high dynamic range und measurement accuracy. It meets the most stringent requirements for certification measurements in line with CISPR, EN, MILSTD-461, DO160 and FCC

R&S Scope Rider Handheld Digital Oscilloscope

The new handheld scope rider offers 5G samples at 10 bit ADC operation. The analysis bandwidth is from 60–500 MHz. The handheld oscope is ideal instruments for lab and field based applications

R&S Diversity Ranger

Diversity Ranger allows testing and comparison of voice and data services on a compact and portable system with extended autonomy. Fully 4G/LTE capable, the system offers a wide range of integrated mobile devices and scanners

Rosenberger Electronic

PIA - Passive Intermodulation Analyzers

Facilitate quick and accurate measurement of the intermodulation characteristics of passive components, such as connectors, cable assemblies, antennas and filters. Precise analysis of the quality of mobile communication infrastructure is also possible

Metrology Kits

A comprehensive range of calibration, verification and gauges/gauge kits for selected standard coaxial interfaces

VNA Test Cable and Interchangeable Port Connector System
VNA Test Port Adapters & Microwave Cable Assemblies

For vector network analyzers, the high-flexibility test cable with excellent phase and amplitude stability as well as the tried-and-tested interchangeable port connector system, provides protection against wear. Additional products are ruggedized test port adapters and microwave cable assemblies up to 70 GHz

Test Devices

A wide range of test devices for microwave measurements designed for various requirements and varying demands: from low-frequency devices for simple measurements to components permitting high precision broadband measurements.

Precision Connectors and Measurement Adaptors

Precision connectors facilitate low-wear use by the utilization of high-quality raw materials such as stainless-steel and CuBe and sophisticated gold surface layer thicknesses on the center contact

Multiport Mini-Coax Connectors & Cable Assemblies
for Board-to-Board Applications up to 20 GHz/40 GHz

A wide range of Multiport Mini-Coax connectors and cable assemblies

Savitri Telecom

OFC, COPPER, E-1, DATA

 

Fusion Splicing Machine (Single and Ribbon Fiber) 

For Jointing the OFC  (Optical Fiber Cable)

Optical Time domain Reflect Meter (OTDR)

For detecting the events and equivalent and total losses in OFC

Test and Measuring Instruments

Optical Power Meter for all Application

Measuring the signal strength at the end of OFC

Optical Laser Source for all Application

Measuring the signal strength at the end of OFC

Visual Fault Locator for all Application

Testing the other end of OFC with naked eyes for very  small distances

Back Reflection Meter for all Application

For measuring the back signal strength in OFC cable

Optical Variable Attenuator for all Application

To attenuate the signal strength in OFC

Optical Switch for all Application

FOR distribution/Managing the running services

Optical Talk Set, Clip on Coupler, Live Fiber Identifier

For testing the availability of signal in OFC

Optical Spectrum Analyzer

Detail testing/Analysis of different available bandwidth

SDH Analyzer

Detail Testing of Transmission Networks

CWDM Channel Checker

Testing of CWDM networks

DWDM Channel Checker

Testing of DWDM networks

Optical Network Management (ONMS) System

Managing Alarms with GPS and SMS/Mail pop-ups of OFC networks

Cable and Pipe Line Locator

Locating path and depth of underground Pipes and cables

Data Network Analyzer for all Applications

Analysis of layer 1 to layer 7 protocols

Smart Class E-1Tester

Detail Testing of E1 signals

Smart Class Ethernet

Testing of Ethernet traffic up to 1 GB

XDSL Tester

Testing, Parameters of copper cable

Network Certifier

Testing and certification of Copper and fiber cables in networks as per different International standards

Wireless, CDMA, GSM, RF Test Instrumen

3GMA Drive Test Tools

This tool is used for analysis of parameters required for Mobile phone signal strength

RF Power Meters, RF Analyzers, VSWR Meters

Measuring the signal strength Radio frequency signal

Multipurpose Base Station Testers/ Analyzers

Testing the parameters of RF cables

Network & Enterprises, Structure Cabling Test Instruments

All types of SM/MM Simplex/ duplex Adapter& Coupler





Copper and Fiber cable assembly accessories

All types of SM/MM Attenuator, Connectors

Bare fiber adapter

All types of Splitters/Couplers, WDM

All Type SM/MM Ferrule

Zirconia sleeve, Bronze sleeve, Mechanical Splice

Spirent Communications

Lumos

From mobile backhaul, to business services, to global IP networks—operations groups benefit from performance monitoring and troubleshooting in a single solution

Landslide

Performance, scale, and functional testing of mobile, Wi-Fi, IMS and diameter networks

Epitiro

Get real-time Quality of Experience (QoE) insight from thousands of Wi-Fi locations with Spirent Epitiro

Tektronix

RSA306B – USB Spectrum Analyzer

A full-featured spectrum analyzer for less than half the price of a conventional unit. It weighs just 1.65 pounds, takes little space on  bench, and fits easily in hand, bag, pocket or tool belt

RSA5000 Series

Advanced signal analysis
Up to 26.5 GHz coverage
Up to 165 MHz Real-time Bandwidth
0.434 μs minimum even duration for 100% POI

SignalVu-PC Spectrum Analysis Software

Included free with RSA Series, 17 measurements included free and options for common applications

MDO3000

Oscilloscopes with integrated spectrum analyzer, function generator, and logic analyzer for exceptional versatility

PA1000: 1 Phase Power Analysis

Energy Consumption Testing
Current Harmonics – IEC61000-3-2
5 mW Standby Power – IEC 62301

PA3000: 1 and 3 Phase Power Analysis

1 to 4 Channels for Efficiency Testing
0.04% Accuracy; 1 Mhz Bandwidth
10 mW Standby Power – IEC 62301

Toshniwal Controls

N9342C-CA7 Handheld Cable and Antenna Tester, 5 MHz to 4 GHz

Frequency range: 5 MHz to 7 GHz
Directivity: 40 dB
Reflection measurement: Return loss, VSWR, and reflection coefficient
Cable loss: One-port cable loss
Distance-to-fault (DTF): DTF only, DTF and reflection measurement
Tracking generator (Option TG7) is required in order to use this option

N9344C Handheld Spectrum Analyzer (HSA), 20 GHz

9 kHz to 20 GHz
–144 dBm displayed average noise level (DANL)
± 1.3 dB amplitude accuracy
< 0.95 s sweep time for 20 GHz full span

 N9343C Handheld Spectrum Analyzer (HSA), 13.6 GHz

9 kHz to 13.6 GHz
–144 dBm displayed average noise level (DANL)
± 1.3 dB amplitude accuracy
< 0.7 s sweep time for 13.6 GHz full span

N9342C Handheld Spectrum Analyzer (HSA), 7 GHz

9 kHz to 7 GHz
–152 dBm displayed average noise level (DANL)
±1.5 dB amplitude accuracy
< 0.4 s sweep time for 7 GHz full span

N9340B Handheld RF Spectrum Analyzer (HSA), 3 GH

9 kHz to 3 GHz
−144 dBm displayed average noise level (DANL)
±1.5 dB amplitude accuracy
< 0.1 s sweep time for 3 GHz full span

Viavi (JDSU)

P5000i Fiber Microscope

Automated Fiber Inspection & Analysis Probe provides PASS/FAIL capability to PC, laptops, mobile devices, and Viavi test solutions

FiberChek Probe Microscope

The “all-in-one” handheld solution for fiber inspection with built-in capabilities for image viewing, auto-focus, Pass/Fail analysis, storing/recalling results. It can be used on its own or connected (WiFi, Bluetooth, USB) to other devices.

SmartOTDR

Compact, easy, upgradable OTDR kit for installing and troubleshooting optical fibers across premises, FTTA, and FTTH networks

SmartClass Fiber OLTS-85/85P

Optical Loss Test Sets let installers and technicians work fiber smart by integrating industry-leading fiber inspection with Tier 1 testing. This efficient, easy-to-use solution promotes best practices while cutting testing and certification time in half. 

Digital Services Activation Meter (DSAM)

Handheld field meter for DOCSIS/EuroDOCSIS cable modem installation; enables cable installers to increase the speed and efficiency in deploying high-speed data and video services

OneExpert CATV

An innovative signal analysis meter greatly simplifies and automates cable installation and service test processes. A multi-touch, user-friendly interface and OneCheck™ automated tests ease complex tasks with a simple dashboard with clear pass/fail results. Able to guarantee DOCSIS 3.1 service performance

ONT-600 Multiport Test Module (MTM)

All-in-one solution tests Layers 1 to 3 at 155 Mbps to 11.3 Gbps rates; reduces CapEx with high port density and a comprehensive feature set; maximizes efficiency and minimizes test time with multiuser, multiport capability

ONT-600 400G CFP8 Module

A scalable test solution based on the latest draft standard for 400G Ethernet (IEEE 802.3 bs) and ready for OTUC4. It boasts a CFP8 slot to host the first-generation 400G pluggables; future FlexE and FlexO applications are addressed via 5 QSFP28 slots.

MTS-5800 Handheld Network Tester

Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fibre Channel, and OTN support; automated, enhanced RFC 2544; SAM complete testing per ITU-T Y.1564; integrated burst testing approach per MEF 34; RFC 6349 TrueSpeed TCP throughput testing in single- and dual-port versions; compatible with JDSU 4100-Series OTDR modules and Smart Link Mapper, fiber microscopes, and optical power meters

MTS-6000A with CSAM

The CSAM provides 100 Gbps network testing flexibility in the most compact format. Test 10 Mbps to 118 Gbps with a portable test instrument that can test every interface in the central office. CSAM is unique in its support of 100GE LR4, SR10, and SR4 in one instrument.

Cell Advisor (One Box Site Turn-up, Installation and Maintenance Solutions)

One Visit, One Instrument, One Touch, unique fiber inspection and front-haul RFoCPRI testing; RF and optical power in one instrument; 3GPP conformance auto testing; best-in-class LTE, LTE-A, MIMO, and carrier aggregation demodulation; unique coax and fiber single box solution; unique cloud enable management; enable single visit cell site turn up, installation and maintenance; captures high speed wireless traffic for detailed analysis, uniquely rewinds time on your network for lightning-fast troubleshooting

MTS-8000 with 40/100 G Transport Module

Supports testing of all high-speed line rates, 40/100 GE, OTU3/4, and OC-768/STM-256 including field optimized optics self-test; supports 40/100 GE with 10 concurrent Ethernet data streams for service testing integration into Y.1564 SAM Complete

Yokogawa India

AQ6370 Series Optical Spectrum Analyser

OSA for characterization of optical components in Telecom, VIS (visible), NIR (near-infrared), ex NIR (Extended near-infrared), MWIR (middle wavelegth infrared) regions

AQ7280 Series OTDR

Multi-task, multi-touch, multi-module, PON Optimized OTDR

AQ2170,AQ2170H

Optical Power meter and Optical Light sources

AQ6150 and AQ6151

High precision, Optical wavelength meters for inspection of DFB-LD’s, tunable lasers, optical trans receivers, WDM transmission systems, etc. Accuracy of upto 0.3 pm (Pico-meter)

AQ1300 Series

10-Gb Ethernet Testers

AQ2200 Series

Optical Power meters, tunable laser source, mutiplexers, attenuator, transreceiver, optical switch modules

Others

Cobham AvComm, OctoScope, SEI Trading, Siricom, Sparnex Instruments, Sunrise Telecom, Tirumala Seven Hills (P) Ltd., Trend Communications, and VXL.


 

matrix-telesol-till-20171126

india-mobile-congress

Aegis Graham Bell Award 2017

Infosec Intelligence Conclave

Nextgen Conference

Telecom Convergence Summit

spotforum-upto-20171129

iot

Read Current Edition of Communications Today